454 Hwy 185 S
Donalds, SC 29638
jamie
Camera Tripod Adapter Kit
To Place an order:
1. Get in touch on our contact page and tell me what you want and how you plan to pay. Include your FULL SHIPPING ADDRESS.
2. I'll send you your total.
3. You send your payment via PayPal or by mail.
4. I ship your order.
We now have camera tripod adapters available for those of you who want to
turn a camera tripod into a launch pad! (You provide your own tripod)
Our new camera tripod adapter let's you make a launch pad out of your
camera tripod. Accepts 1/8" through 1/4" rods. Rods are held firmly in place
with TWIN 1/4-20 thumb screws. The twin thumb screw design enables the
adapter to hold the three most commonly used launch rod sizes equally well.
Made from aircraft grade 6061-T6 aluminum.
$37.99 includes free priority mail shipping.
Send PayPal payments to: jamie@knight-mfg.com.
Camera tripod adapters have a 1/4-20 tapped hole in the bottom for
attachment to your camera tripod's camera mounting bolt. You can use the
stock bolt that comes with the tripod, which is usually threaded 1/4-20, but
that little nub of a bolt is awfully short (designed to hold a camera only).
We recommend that you run down to your favorite hardware store and buy
a slightly longer 1/4-20 bolt for a more positive attachment. The hole in the
bottom of the adapter is 5/8" deep for this purpose. Note: On the tripod I
have, the bolt is held in place with a c-clip and is easily removed. The bolts
on other tripods may attach differently. If your tripod's bolt isn't threaded
1/4-20, we can thread the hole to match your bolt. I just recently did one
in 3/8-16.
Our camera tripod adapter can also be purchased as a kit which includes
one of our 7 X 7 inch blast deflectors from our FLP-32 launch pads. So you'll
have everything you need for the conversion. *Note: The new kits come
with the 14 gauge 7 X 7 inch flat steel blast deflector from our FLP-32
launch pad (not the older style blast deflector shown here) and our
RP-1 clamp on aluminum rocket perch.
$64.99 includes free priority mail shipping.
Send PayPal payments to: jamie@knight-mfg.com.
This is the blast deflector and perch that comes with the current Camera
Tripod Adapter Kits.
The adapter attaches to the camera mounting bolt and holds 1/8" through 1/4" launch rods equally well.
Finished product. (Tripod shown is not included)
The following photos are of Bud Wood's Executioner XL on a G40W-7 launching from his tripod pad using our tripod adapter kit. Thanks for the photos, Bud!
454 Hwy 185 S
Donalds, SC 29638
jamie